Tintas de Serigrafía con Base SolventeSistemas de Serigrafía para Teclados de MembranaTintas de Tampografía

Thermo-Jet® CFI

Universally applicable screen and pad printing ink
free of cyclohexanone & good weather resistance

Contáctenos ahora!
Choose a category

Area of Application and General Characteristics

Thermo-Jet® CFI is a glossy multi-purpose ink for acrylics, rigid and soft PVC, polycarbonate and pre-treated polyester. The fast drying Thermo-Jet® CFI ink shows good printability and high resistance to chemicals and abrasion. On suitable substrates the ink is deep drawable and weather resistant. 
The ink system is free of cyclohexanone.

Further information can be found in our technical data sheets in the Downloads section

PropiedadesThermo-Jet® CFI
One-Component-Ink
Two-Component-Ink
Three-Component-Ink
Substrates
Acrylics
Acrylics (PMMA)
Coated Substrates
Thermosetes
Glass / Ceramics
Wood
Wood, plywood
Leather
Metal / nonferrous Metal
Paper
Polyamide
Polycarbonate
Polyester untreated
Polyester pre-treated
Polyethylene pre-treated
Polypropylene untreated
Polypropylene pre-treated
Polystyrene, ABS, SAN
Polyurethane
PVC rigid
PVC plasticised
Drying
Slow
Medium
Physical
Physically reactive
Fast
Grade of gloss
glossy
high gloss
matt
satin gloss
Auxiliaries
Hardener
002 002
Thinner / Percentage (%)
30-35
Thinner series
Further processing
outdoor resistant
heat curable up to °C
high frequency sealing
heat sealing
thermo forming
Pröll GmbH, Zentrale
+49 9141 906-0 info@proell.de
Printing Technique
+49 9141 906-674