Tintas de Tampografía

KS-U

Fast drying pad printing ink for printing on rigid PVC, polystyrene, ABS, SAN, acrylics, polycarbonate and pretreated polyolefines

Contáctenos ahora!
Choose a category

General Characteristics

Coated materials, polyamide, pre-treated polypropylene, thermosets and metal.

To improve adhesion in these cases, stoving and/or the use of hardener is recommended (please see “Other Directions for Processing”).

Pre-tests are essential.

Finish

High gloss

Further information can be found in our technical data sheets in the Downloads section

PropiedadesKS-U
One-Component-Ink
Two-Component-Ink
Substrates
Acrylics (PMMA)
Coated Substrates
Thermosetes
Glass / Ceramics
Wood, plywood
Leather
Metal / nonferrous Metal
Polyamide
Polycarbonate
Polyester untreated
Polyester pre-treated
Polyethylene pre-treated
Polypropylene untreated
Polypropylene pre-treated
Polystyrene, ABS, SAN
Polyurethane
PVC rigid
PVC plasticised
Drying
Physical
Physically reactive
Grade of gloss
glossy
high gloss
satin gloss
Auxiliaries
Hardener
030 030
Thinner / Percentage (%)
25 25
Thinner series
Pröll GmbH, Zentrale
+49 9141 906-0 info@proell.de
Printing Technique
+49 9141 906-674