NoriGlass TP 930 Titanium White

TPI – Touch Panel Ink

Very high Optical Density:
- OD ~ 1 @ 30 μm Layer Thickness
- OD ~ 5 if back-printed with Gray TPI 748/015 (x-rite 361T Densitometer)
Very high Degree of Whiteness:
- L* ~ 89; b* ~ – 0,2; through Gorilla-Glass 0.6 mm, back-printed with Gray TPI 748/015 (x-rite color i 7)
Very high Surface Free Energy: ( Very good bondability.)
- σ total ~ 50 mN/m
- σ disperse ~ 45 mN/m
- σ polar ~ 5 mN/m
- (Krüss MSA; H2O/Diiodomethane)

NoriGlass TP 930’s properties allow the best possible realization of touch panels (white frame) or capacitive touch switches.

If back-printed, the cured ink layer is opaque and convinces with its pure white color-shade.

Further information can be found in our technical data sheets in the Downloads section

PropiedadesNoriGlass TP 930 Titanium White

One-Component-Ink

Two-Component-Ink

Three-Component-Ink

Substrates

Acrylics

Coated Substrates

Thermosetes

Glass / Ceramics

Wood

Metal / nonferrous Metal

Paper

Polyamide

Polycarbonate

Polyester untreated

Polyester pre-treated

Polyethylene pre-treated

Polypropylene untreated

Polypropylene pre-treated

Polystyrene, ABS, SAN

PVC rigid

PVC plasticised

Drying

Slow

Medium

Fast

Grade of gloss

glossy

matt

satin gloss

Further processing

outdoor resistant

heat curable up to °C

high frequency sealing

heat sealing

thermo forming

AplicaciónNoriGlass TP 930 Titanium White

Downloads

Descargas generalesSistemas de Serigrafía para Vidrio